home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tech Arsenal 1
/
Tech Arsenal (Arsenal Computer).ISO
/
tek-20
/
mods_all.zip
/
DJ160
< prev
next >
Wrap
Text File
|
1992-09-15
|
828b
|
19 lines
DJ160
Being new to packet, I had a hard time figuring out how to connect my
Alinco DJ160 HT to my TNC. Like many HT's Alinco has no documentation
on packet hook ups.
After experimenting I finally was able to get the connection to work.
Buck Rogers book PRIME has HT connections but none for my radio.
I found that if I used the connection for the ICOM 2AT it worked fine.
At the tip connection of the 2.5mm mini plug, connect a 4.7K Ohm resistor
and a .1 mfd Capacitor. Connect the lead from the resistor to the TNC
PTT line and the lead from the capacitor to the TNC transmit audio line.
I connected the groubd line from the plug to TNC ground.
Receive audio is simply connected through the ext speaker jack to TNC
receive audio. I run a KPC-1 TNC.
Hope this is of some help. 73 Dick KC6TOL.